Product introduction:
Nitrogen filled oven is a new type of drying oven, which can meet the needs of relevant units such as electronics, medical and health, instruments, meters, factories, colleges and universities, scientific research departments and so on. The oven is filled with nitrogen or inert gas for protection, which helps to improve the quality of the test article. The oven has beautiful appearance, convenient use, sensitive and correct temperature control. This oven consists of box, working room, heating system, gas pressure reducing regulating valve, exhaust port and other components. The box body is processed and welded from thin steel plate, the inner wall of the working room is made of high-quality stainless steel plate, and the aluminum silicate fiber is filled between the box body and the working room as thermal insulation material. High temperature resistant sealing strip and pressing device are adopted for the box door and the outer frame of the studio, so the sealing performance of the box is effectively guaranteed.
Main purpose:
Heating and drying of capacitors, IC, crystal oscillator, led, MLCC and other products in factories, universities and laboratories.
Main parameters:
◆ studio material: stainless steel wire drawing plate (consistent with the plate of elevator)
◆ working room temperature: room temperature ~ 250 ℃ (adjustable)
◆ temperature control accuracy: plus or minus 1 ℃
◆ temperature control mode: PID digital display, intelligent temperature control, key setting, LED digital display
◆ heating equipment: stainless steel heating pipe (service life can reach more than 40000 hours)
◆ air supply mode: double air duct horizontal air supply
◆ air supply mode: special blower motor for long shaft high temperature resistant oven + special multi wing wind wheel for oven
◆ timing device: 1s ~ 9999h constant temperature timing, pre baking time, automatically cut off heating and buzzer alarm when the time is up
◆ safety protection: leakage protection, fan overload protection and over temperature protection
Common specification table: (size can be customized according to customer requirements)
型号 | 电 压 (V) | 功 率 (KW) | 工作温度范围 （℃） | 控温精度(℃) | 充气压力 (MPa) | 工作室尺寸 |
高×宽×深(mm) |
DRP-CD-1 | 220 | 3 | 常温～250 | ±1 | 0.01～0.02 | 450×450×350 |
DRP-CD-2 | 380 | 4.5 | 常温～250 | ±1 | 0.01～0.02 | 650×500×500 |
DRP-CD-3 | 380 | 6 | 常温～250 | ±1 | 0.01～0.02 | 1000×600×600 |
DRP-CD-4 | 380 | 15 | 常温～250 | ±1 | 0.01～0.02 | 1400×1200×900 |
