Product introduction:
The function of tunnel furnace (assembly line oven) is to continuously bake the products to be baked on the assembly line, so as to improve the production efficiency. The shell of the product is made of cold rolled steel plate, the inner tank is made of brushed or mirror stainless steel plate, the surface of the box shell is covered with environmental protection paint, and the space between the shell and the inner tank is filled with aluminum silicate fiber to form a reliable thermal insulation layer. The tunnel oven can be transported by Teflon or metal mesh belt. The heater is installed in the top air duct (or in the air ducts on both sides). It can be adjusted arbitrarily within room temperature ~ 200 ℃, and the door curtain is sealed by silicone rubber strip. The far-infrared heating technology mainly promoted by the national science and Technology Commission is adopted. After being heated, the far-infrared element can radiate more than 2 ~ 15 microns of far-infrared. When it is absorbed by the heated object, it can be directly transformed into heat energy, so as to obtain the effect of rapid drying, shorten the production cycle, save energy sources and improve product quality. The temperature control instrument adopts some imported components, with novel style, convenient use and energy saving!
Main purpose:
It is mainly used for PCB baking, ink drying, surface glue curing and other occasions.
Main parameters:
◆ studio material: stainless steel wire drawing plate (consistent with the plate of elevator)
◆ working room temperature: room temperature ~ 200 ℃ (adjustable)
◆ temperature control accuracy: plus or minus 2 ℃
◆ temperature control mode: PID digital display, intelligent temperature control, key setting, LED digital display
◆ heating equipment: stainless steel heating pipe (service life can reach more than 40000 hours)
◆ air supply mode: vertical air supply
◆ air supply mode: special blower motor for long shaft high temperature resistant oven + special multi wing wind wheel for oven
◆ speed regulating device: frequency converter control, speed adjustable
◆ safety protection: leakage protection, fan overload protection and over temperature protection
◆ optional equipment: touch screen, man-machine interface, PLC, programmable temperature controller, cooling fan
Common specification table: (the size can be customized according to the actual needs of customers)
型 号 | 电压 | 功率 | 工作温度范围 | 控温精度 | 鼓风功率 | 工作室尺寸 | 外形总尺寸 |
（V） | (KW) | (℃) | (℃) | (W) | H×W×L(mm) | H×W×L(mm) |
DRP-SD-50-250 | 380 | 7.5 | 常温～200 | ±2 | 180*1 | 200×500×1800 | 1450×760×2500 |
DRP-SD-60-350 | 380 | 9.0 | 常温～200 | ±2 | 180*2 | 200×600×2500 | 1450×860×3500 |
DRP-SD-70-450 | 380 | 12.0 | 常温～200 | ±2 | 370*2 | 200×700×3500 | 1450×960×4500 |
DRP-SD-80-550 | 380 | 18.0 | 常温～200 | ±2 | 180*4 | 200×800×4500 | 1450×1060×5500 |
